1. Keep Vocals Clear with Pre-Delay
Set your vocal reverb pre-delay to a 1/64 or 1/32 note so the dry consonants cut through before the reverb blooms in time with the groove.
THE TOOLBOX / AUDIO & MIXING
Enter or tap your song's BPM to get instant straight, dotted, and triplet delay times in milliseconds, tempo-synced reverb pre-delay and decay settings, and LFO Hz—with one-click copy and audio preview.
| Note Value | Straight (ms) | Dotted (ms) | Triplet (ms) | LFO (Hz) | Listen |
|---|---|---|---|---|---|
| 1/1 (Whole / 1 Bar) | 0.50 Hz | ||||
| 1/2 (Half Note) | 1.00 Hz | ||||
| 1/4 (Quarter Note) | 2.00 Hz | ||||
| 1/8 (Eighth Note) | 4.00 Hz | ||||
| 1/16 (Sixteenth Note) | 8.00 Hz | ||||
| 1/32 (Thirty-Second) | 16.00 Hz | ||||
| 1/64 (Pre-Delay) | 32.00 Hz | ||||
| 1/128 (Tight Slap) | 64.00 Hz |
MIXING & DELAY REFERENCE
| Note Subdivision | Formula (ms) | At 120 BPM | Best Studio Use |
|---|---|---|---|
| 1/4 Note | 60,000 ÷ BPM | 500.0 ms | Lead vocal throws & spacious guitar echoes |
| 1/8 Dotted | (60,000 ÷ BPM) × 0.75 | 375.0 ms | Syncopated rhythmic guitar & synth arps |
| 1/8 Note | 30,000 ÷ BPM | 250.0 ms | Tight rhythmic slap & hip-hop ad-libs |
| 1/32 Note | 7,500 ÷ BPM | 62.5 ms | Vocal doubling & hall reverb pre-delay |
Set your vocal reverb pre-delay to a 1/64 or 1/32 note so the dry consonants cut through before the reverb blooms in time with the groove.
Dialing bus compressor release time to a 1/16 or 1/8 note makes the mix pump rhythmically with the kick and snare instead of fighting the tempo.
Check acoustic levels in our Decibel Calculator, transpose chords in the Guitar Capo Transposer, or test pitch in the Vocal Range & Pitch Tester.
Divide 60,000 by your song’s BPM to find the exact length of a quarter note in milliseconds (60,000 ÷ 120 BPM = 500 ms). Divide by 2 for an eighth note (250 ms), multiply by 1.5 for a dotted note, or multiply by 2/3 for a triplet.
A dotted eighth note equals 1.5 × an eighth note (or 0.75 × a quarter note): (60,000 ÷ BPM) × 0.75. At 120 BPM, dotted 1/8 delay is 375 ms—the classic U2 / modern worship guitar delay groove.
A 1/64 or 1/32 note pre-delay (roughly 15–40 ms at pop tempos) separates the dry vocal transient from the reverb tail so the singer stays upfront while the reverb still breathes in time with the track.
Divide 1,000 by the millisecond time (Hz = 1000 ÷ ms). At 120 BPM, a quarter-note LFO runs at 2.00 Hz and an eighth-note LFO runs at 4.00 Hz.
Timing your reverb decay (RT60) to a 1/4, 1/2, or 1-bar duration ensures the reverb tail clears cleanly right before the next chord change or snare hit, preventing muddy mixes.
Yes. Tap the button rhythmically in time with any track to average your last 6 taps and immediately update every delay, reverb, and LFO value.