1. Cubic Yards to Tons Formula
Multiply Length (ft) × Width (ft) × (Depth in ÷ 12) ÷ 27 to find cubic yards, then multiply by the stone's density (~1.40 tons/yd³ for #57 crushed stone).
THE TOOLBOX / LANDSCAPING & MATERIALS
Calculate exact tonnage, cubic yards, 50-lb bags, and dump truck sizing for crushed stone, pea gravel, crusher run, river rock, and decomposed granite.
AGGREGATE ORDERING GUIDE
Multiply Length (ft) × Width (ft) × (Depth in ÷ 12) ÷ 27 to find cubic yards, then multiply by the stone's density (~1.40 tons/yd³ for #57 crushed stone).
One cubic yard of gravel equals roughly 54 to 56 fifty-pound bags. For anything above 1 cubic yard, bulk quarry delivery is almost always faster and 50–70% less expensive than buying bagged rock.
Use angular #57 crushed stone or crusher run for driveways and paver bases so stones lock under weight. Reserve rounded pea gravel for foot paths and decorative borders.
Planning a hardscape project? Use Concrete Calculator, Patio Paver Calculator, Fence Material Calculator, or Square Footage Calculator.
| Depth | 1 Cubic Yard Covers | 1 US Ton (#57 Stone) Covers | Typical Project |
|---|---|---|---|
| 2 inches | 162 sq ft | ~116 sq ft | Decorative top dressing / mulch rock |
| 3 inches | 108 sq ft | ~77 sq ft | Garden walkways & pea gravel patios |
| 4 inches | 81 sq ft | ~58 sq ft | Residential driveways & paver base |
| 6 inches | 54 sq ft | ~39 sq ft | Heavy vehicle driveways & French drains |
One cubic yard of standard #57 crushed limestone or gravel weighs approximately 1.40 US short tons (2,800 lbs). Pea gravel averages 1.35 tons/yd³, crusher run road base averages 1.45 tons/yd³, and lightweight volcanic lava rock weighs only ~0.70 tons/yd³.
Landscape beds and walkways typically need 2 to 3 inches of gravel. Residential gravel driveways need at least 4 inches of compacted base (such as crusher run) topped with 2 inches of angular #57 crushed stone.
At 2 inches deep, 1 ton of standard crushed gravel covers roughly 115 square feet. At 3 inches deep it covers ~77 sq ft, and at 4 inches deep it covers ~58 sq ft.
Yes. Add 10% for settling and uneven subgrades, or 15% when compacting crusher run road base with a plate compactor.