1. Overall Tire Diameter Formula
Sidewall (mm) = Width (mm) × (Aspect Ratio ÷ 100). Then Overall Diameter (in) = Rim Diameter (in) + (2 × Sidewall mm ÷ 25.4).
THE TOOLBOX / AUTOMOTIVE FITMENT
Compare stock vs. upgrade tire sizes side-by-side with scaled profile visuals, ±3% diameter safety checks, ground clearance shifts, revolutions per mile, and exact mph / km/h speedometer readings.
Exceeds the ±3% guideline — verify fender/strut clearance, speedometer recalibration, and AWD transfer case tolerance.
| Speedo Reads | Actual Speed | Error |
|---|---|---|
| 20 mph | 20.7 mph | +0.7 mph |
| 30 mph | 31.1 mph | +1.1 mph |
| 40 mph | 41.5 mph | +1.5 mph |
| 50 mph | 51.9 mph | +1.9 mph |
| 60 mph | 62.2 mph | +2.2 mph |
| 70 mph | 72.6 mph | +2.6 mph |
| 80 mph | 83.0 mph | +3.0 mph |
| Measurement | 225/65R17 | 245/60R18 | Difference |
|---|---|---|---|
| Overall Diameter | 28.52" | 29.57" | +3.71% |
| Section Width | 8.86" | 9.65" | +0.79" |
| Sidewall Height | 5.76" | 5.79" | +0.03" |
| Circumference | 89.6" | 92.9" | +3.71% |
| Revs / Mile | 707 | 682 | -25 |
| Ground Clearance | Baseline | +0.53" | Higher |
FITMENT ENGINEERING GUIDE
Sidewall (mm) = Width (mm) × (Aspect Ratio ÷ 100). Then Overall Diameter (in) = Rim Diameter (in) + (2 × Sidewall mm ÷ 25.4).
A 225/65R17 has a 146.3 mm (5.76") sidewall and 28.52" diameter. Upgrading to 245/60R18 gives a 147.0 mm (5.79") sidewall and 29.57" diameter (+3.71%), raising ground clearance by +0.53" and making 60 mph indicated equal 62.2 mph actual.
On all-wheel-drive (AWD) vehicles, always keep all four tires within 1%–2% rolling circumference of each other (and replace mismatched worn tires in sets) to avoid overheating center differentials.
Convert metric/imperial dimensions in Unit Converter, estimate auto financing in Car Payment Calculator, or check percentages in Percentage Calculator.
Automotive fitment engineers recommend keeping a replacement tire’s overall diameter within ±3% of the original factory (OEM) tire diameter. Staying within ±3% prevents inaccurate speedometer readings, protects ABS and stability control calibration, and reduces premature brake or transmission wear.
225 is the section width in millimeters (225 mm), 65 is the aspect ratio (sidewall height is 65% of the width = 146.25 mm), R indicates radial construction, and 17 is the wheel rim diameter in inches.
A taller tire travels farther per wheel revolution, so your actual road speed is higher than what the speedometer displays. For example, if your new tire is 4% taller and your dash reads 60 mph, you are actually driving 62.4 mph.
Usually you can go 10 mm to 20 mm wider (for example, 225 to 235 or 245) if your wheel rim width falls within the tire manufacturer’s approved rim-width range and you have sufficient strut and fender clearance.
Plus-sizing increases wheel rim diameter by 1 or 2 inches while lowering the tire aspect ratio (sidewall profile) so the overall tire diameter stays nearly identical—for example, moving from 225/65R17 (28.5") to 245/60R18 (29.6" or 245/55R18 at 28.6").
Dropping down 1–2 inches in rim diameter with a narrower tread and taller sidewall (keeping total diameter within ±3%) improves snow traction, cushions potholes, and lowers winter tire replacement cost.