1. Spotting Microswitch Chatter (<80 ms)
Click the target pad at a relaxed, steady rhythm. Healthy switches register clean single clicks (150–400 ms apart); oxidized mechanical contacts bounce within 15–70 ms and light up red as a confirmed fault.
THE TOOLBOX / MEDIA & HARDWARE DIAGNOSTICS
Catch failing mouse microswitches across Left, Right, Middle, and Side buttons with millisecond bounce logging, and measure your true 125–4000 Hz USB/wireless polling rate locally.
Click normally 20–50 times inside the target pad using Left, Right, Middle, or Side buttons. Any unintended repeat faster than 80 ms flags a failing microswitch.
Swirl your mouse smoothly inside the dark pad to measure true USB/wireless report rate via PointerEvent.getCoalescedEvents().
MOUSE DIAGNOSTIC GUIDE
Click the target pad at a relaxed, steady rhythm. Healthy switches register clean single clicks (150–400 ms apart); oxidized mechanical contacts bounce within 15–70 ms and light up red as a confirmed fault.
Before buying a new mouse, check your mouse software for a Debounce Time slider (raising it from 2 ms to 8–12 ms often eliminates chatter), try a different USB port, or blow compressed air under the button housing to clear static buildup.
A standard office mouse polls at 125 Hz (8.0 ms interval), gaming mice run at 1000 Hz (1.0 ms), and esports wireless dongles reach 4000–8000 Hz (0.25–0.125 ms).
Diagnose your full setup with our Keyboard Event Tester, Touchscreen & Stylus Test, Gamepad Tester, or Monitor Dead Pixel Test.
| Polling Rate | Report Interval | Typical Hardware Tier |
|---|---|---|
125 Hz | 8.00 ms | Standard office & Bluetooth mice |
500 Hz | 2.00 ms | Battery-saving wireless gaming mode |
1,000 Hz | 1.00 ms | Standard wired & 2.4 GHz gaming mice |
2,000 – 4,000 Hz | 0.50 – 0.25 ms | High-refresh (240 Hz+) esports mice |
Worn or oxidized mechanical microswitches (like aging Omron leaf springs) bounce electrically when pressed or released, firing two contacts 10–70 milliseconds apart. Because a human finger rarely clicks twice faster than ~80 ms on purpose, intervals below 80 ms flag switch chatter.
Perform 30 to 50 steady single clicks on each button (Left, Right, Middle, and Side M4/M5), mixing quick taps with slightly slower presses. Even 1 or 2 red chatter alerts under 80 ms confirms an intermittent double-clicking switch.
Yes. The click pad suppresses the browser context menu so you can test Left, Right, Middle/Scroll-Wheel, Side Back (M4), and Side Forward (M5) switches independently with separate fault counters.
Standard browser mousemove events are throttled to your monitor refresh rate (60–144 Hz). This tester reads PointerEvent.getCoalescedEvents() to unpack every high-frequency USB or wireless packet delivered between display frames.
80 ms is the ideal default for normal single-click testing. If you are intentionally jitter-clicking or butterfly-clicking for gaming, lower the threshold to 40–50 ms so only true hardware bounces are flagged.
Yes. All millisecond click timings and coalesced pointer intervals are measured locally with high-resolution performance.now() timestamps.