1. Edge-to-Edge Dead-Zone Check
After a screen replacement or drop, touch failures usually appear along a single vertical column, horizontal row, or screen bezel. Switch to 12 × 18 Fine and press Fullscreen Edge Test to audit every perimeter cell.
THE TOOLBOX / MEDIA & HARDWARE DIAGNOSTICS
Expose dead capacitive touch strips with a fullscreen swipe grid, verify up to 10-finger simultaneous multi-touch, and test active stylus pressure, X/Y tilt, and pointer sampling rate locally.
DIGITIZER DIAGNOSTIC GUIDE
After a screen replacement or drop, touch failures usually appear along a single vertical column, horizontal row, or screen bezel. Switch to 12 × 18 Fine and press Fullscreen Edge Test to audit every perimeter cell.
Use the Multi-Touch Finger Pad to confirm pinch-zoom and gaming controls track cleanly without dropping finger IDs—or let it sit untouched to catch phantom ghost touches.
Draw light-to-heavy strokes on the Stylus Pad to verify pressure curves (0%–100%) and tiltX/tiltY shading angles on Apple Pencil, Samsung S-Pen, Surface Pen, and Wacom digitizers.
Inspect the rest of your device with our Monitor Dead Pixel Test, Mouse Polling Rate Tester, Keyboard Event Tester, or Gamepad Tester.
| Observed Test Pattern | Likely Hardware Cause | Quick Check |
|---|---|---|
| Entire straight vertical or horizontal strip unresponsive | Damaged capacitive row/column trace or loose flex connector | Remove thick screen protector and re-test |
| Random touches appearing hands-free | Ghost touch from cracked glass, moisture, or noisy charger | Unplug third-party charging cable and re-test |
| Multi-touch stops at 3 fingers | OS 3-finger screenshot or swipe gesture intercepting input | Temporarily disable multi-finger OS gestures |
| Stylus pressure stuck at 50% | Passive capacitive stylus or browser pen permission | Confirm Bluetooth/active pen pairing |
Open the Dead-Zone Swipe Grid, tap Fullscreen Edge Test, and slowly drag your finger across every row, column, and outer screen border. Any strip or corner tile that refuses to turn green indicates a dead capacitive channel or loose replacement-screen digitizer ribbon.
Most modern smartphones and tablets support 5 to 10 simultaneous multi-touch points. Switch to the Multi-Touch Finger Pad and place all fingers down together—if the count caps at 3 or 4, check whether OS 3-finger screenshot gestures are intercepting touches.
Yes. The Stylus Pressure & Tilt Pad reads W3C PointerEvent pressure (0–100%), tiltX, and tiltY in real time, scaling stroke width dynamically with pen pressure.
Ghost touch happens when a failing digitizer registers phantom taps without you touching the screen. Leave the Multi-Touch Finger Pad open hands-free for 30 seconds—if rings or coordinates jump on their own, the digitizer is generating ghost touches.
Standard 60 Hz displays report pointer events at ~60–120 Hz, whereas 120 Hz ProMotion/gaming phones and drawing tablets often report 120–240 Hz during fast swipes.
No. All pointer coordinates, pressure readings, and grid checks run 100% locally in your browser.