1. Classic 5V-to-3.3V Logic Level Shift
Using R1 = 10 kΩ and R2 = 20 kΩ gives Vout = 5 × 20 / 30 = 3.333 V with only 0.17 mA of standby current and less than 1 mW of heat—safe for 1/8 W and 1/4 W resistors.
THE TOOLBOX / SCHOOL & ELECTRONICS ENGINEERING
Calculate exact unloaded and loaded output voltage (Vout), divider current, and resistor wattage dissipation with a live circuit schematic—plus an interactive 4-band resistor color code decoder and Ohm’s law solver.
CIRCUIT DESIGN & LOGIC SHIFTING
Using R1 = 10 kΩ and R2 = 20 kΩ gives Vout = 5 × 20 / 30 = 3.333 V with only 0.17 mA of standby current and less than 1 mW of heat—safe for 1/8 W and 1/4 W resistors.
Enter your downstream ADC or circuit input impedance into Load Resistor RL to verify how much Vout sags under load before ordering parts.
Explore Scientific Calculator, Sig Fig Calculator, or Unit Converter.
| Conversion | R1 (Top) | R2 (Bottom) | Unloaded Vout |
|---|---|---|---|
| 5V → 3.3V | 10 kΩ | 20 kΩ | 3.33 V |
| 5V → 2.5V | 10 kΩ | 10 kΩ | 2.50 V |
| 12V → 5V | 14 kΩ (or 15 kΩ) | 10 kΩ | 5.00 V (4.80 V) |
| 12V → 3.3V | 27 kΩ | 10 kΩ | 3.24 V |
For two series resistors R1 (top) and R2 (bottom to ground) connected to input voltage Vin, the unloaded output voltage is Vout = Vin × R2 / (R1 + R2).
A load connected to Vout sits in parallel with R2, lowering the effective bottom resistance to R2_eff = (R2 × RL) / (R2 + RL) and causing Vout to sag. Keep RL at least 10× larger than R2 to minimize voltage drop.
No—resistive dividers are ideal for low-current logic signals and ADC sensing (e.g., stepping a 5V UART TX line down to 3.3V with 10 kΩ and 20 kΩ), not for supplying variable power current. Use an LDO or buck regulator for power rails.
Bands 1 and 2 give the first two significant digits, Band 3 is the decimal multiplier (10^n), and Band 4 is the tolerance (Gold = ±5%, Brown = ±1%). For example, Brown-Black-Orange-Gold equals 10 × 1,000 = 10 kΩ ±5%.